NEWS
08-08
Does the planetary ball mill use 220V or 380V voltage?
For the experimental planetary ball mill, the capacity of the ball mill tank within 8L is 220V, which is an ordinary household power supply,380V three-phase power consumption with the capacity of ball mill tank above 12L.
08-08
How many cans are there in the planetary ball mill? How does it work?
Answer: the planetary ball mill is equipped with four ball milling tanks on the same rotary table. When the rotary table rotates, the ball milling tank rotates around its own axis while rotating around the axis of the rotary table. The grinding balls in the tank collide with each other in high-speed movement, grinding and mixing samples.
08-08
What are the characteristics of your planetary ball mill?
Our company is equipped with oil seal mute technology. The main disc of the traditional ball mill is dry grinding of the gear without any lubrication assistance. Under the long-term operation environment, the gear is easy to wear and the clearance is getting larger and larger, which can not achieve consistency for the operation coordination of the whole main disc, resulting in great noise and unstable service life. In my process, a closed oil seal box is added under the planetary main disc Let the whole planetary main disk soak in the lubricating oil, and the whole is also a closed box, so Z can directly feel the reduction of sound. The important thing for Z is that after the gear is assisted by lubricating oil, the lubrication between gears can reduce wear and the service life of the equipment is longer and more stable.
08-08
What industries are planetary ball milling generally used in?
Planetary ball mill is widely used in geology, minerals, metallurgy, electronics, building materials, ceramics, chemical industry, light industry, medicine, beauty, environmental protection and other departments. For example: electronic ceramics, structural ceramics, magnetic materials, lithium cobaltate, lithium manganate, catalyst, fluorescent powder, long afterglow luminescent powder, rare earth polishing powder, electronic glass powder, fuel cell, ceramic capacitor, zinc oxide varistor, piezoelectric ceramic, nano-material, wafer ceramic capacitor, MLCC, thermistor (PTC, NTC), ZnO varistor, arrester valve plate, strontium titanate. Piezoelectric transformers, chip resistors, thick film circuits, pyropotentiometers, alumina ceramics, zirconia ceramics, fluorescent powder, zinc oxide powder, cobalt oxide powder, Ni-Zn ferrite, Mn-Zn ferrite and other industries.
08-08
What are the advantages of agate ball mill?
Agate is a kind of natural ore, which is naturally generated. Its main component is silica. Pollution-free is the characteristic of its z size. The industry Z of agate tank application is concentrated in the environmental testing and Research Institute. Because the pollution of agate to materials is almost zero, the heat dissipation performance of agate itself is also very good. Some materials need to be ground at normal temperature, so agate ball is the first choice, It can ensure the purity and ensure that the material will not be damaged by excessive temperature during grinding.
08-08
What are the advantages of polyurethane ball mill?
Polyurethane ball milling tank, nylon and polytetrafluoroethylene are all polymer materials. Polyurethane Z is characterized by its high elasticity, and its surface smoothness is the highest among all materials. In nano-powder ball milling and mixing, Z's concern is not that the grinding fineness can't reach, but that it is easy to stick to the wall. Among all grinding materials, 85% of them are easy to grind, while 15% of them are easy to stick to the wall. Then polyurethane will be a good way to overcome this problem. The non-stick wall of polyurethane depends on the elasticity and smoothness of its surface, and the material can't adhere to its surface, so that it can get a good grinding. It also has a very good feature: its purity is very high, it doesn't pollute the sample, and its wear is very, very small, even if a little wear can be completely burned in the later heat treatment, it won't remain in the material.
08-08
Well, after reading your request, it is also very close to a recent experiment in Z. this customer is a Mineral Research Institute under the Chinese Academy of Sciences. They also grind ore. I recommended the model of planetary mill yxqm-4l. I recommended the choice of corundum and zirconium oxide for grinding tank. The grinding ball uses zirconia ball. After Z, they still chose the combination of corundum tank and zirconia ball, Such a model is cost-effective. Their family has received the machine and started to use it. During our follow-up visit, we learned that they are quite satisfied with the efficiency of this product.