QM-QX0.4L Omnidirctional Planetary Ball Mill

Application:

The ball grinding used for high-tech micro computer chip control.It can run alternately for positive turn and reverse turn(0-999min), and run alternately for positive turn and pause,reverse and pause,and than positive run. It is especially suitable for cooling or intermittent operation.

Category:


You can send us an email:weicaipeng@163.com

Inquire Now
+
  • undefined

Brand Name

MITR

Model

360 degree rotating planetary ball mill- MITR-QMQX-0.4L

Grinding tank volume(ml)

50ml-100ml

General grinding jar material selection

Metal material selection:304 stainless steel、Tungsten carbide(YG8)

Nonmetal material selection:ceramic / corundum / alumina, zirconia, agate

high polymer material selection:Nylon, polyurethane, polytetrafluoroethylene(PTFE)

General grinding ball material selection

Stainless steel,ceramic,corundum,alumina,zirconia, agate, tungsten carbide

Maximum loading per jar

Raw material and grinding ball less than 1/3 of grinding jar

Feeding granularity

Friable material less than 10mm,others less than 3mm

Discharging granularity

minimum up to 0.1μm

Grinding Method

Dry grinding / wet grinding / high energy alloying grinding / vacuum grinding(need customized) / low temperature grinding(need customized)

Planetary speed (variable frequency adjustable)

Max Revolution 0-450r/min,Rotation 0-900r/min

Planetary total speed:0-3600r/min

360 degree speed(variable frequency adjustable)

20/min

Speed ratio(revolution:rotation)

1:2

Adjusting speed control method

PLC Frequency conversion control system,Touch screen control system

Driving style

Gear drive

Grinding ball ratio(the detail ratio contact customer service)The right sheet is just for reference.In fact that we are matching according to the customer requirement.

General grinding over 800 mesh(5mm;10mm;15mm) feeding material less than 3mm

Fine grinding 800-1500 mesh(3mm;5mm;10mm;)feeding material less than 1mm

Super fine grinding over 1500 mesh(0.1~10μm)(1mm;3mm;5mm)feeding material less than 200 mesh

Voltage

220V

Power

0.55Kw

Working method

Two or four cans working at the same time

Maximum continueworking time

72h(Timing 0-9999h)

Programmed control

The ball grinding used for high-tech micro computer chip control.It can run alternately for positive turn and reverse turn(0-999min), and run alternately for positive turn and pause,reverse and pause,and than positive run. It is especially suitable for cooling or intermittent operation.

Weight

140kg

Dimension

99*55*65(cm)